8 Laser-Cut Steel Reinforcing ribs
Back our friction-less poly moldboard
|
Hot-Dipped Galvanized Steel Frame
Provides added resistance to abrasion, water and rust, making our plows virtually maintenance free.
|
6 Tension Springs
Keep the blade upright and offer ample room for addition of a shock absorber kit, if desired.
|
1/2" x 6" Cutting Edge
With top hole bolt pattern
|
6” Curved Deflector
Rolls the snow nicely, keeps it down on the blade and away from the vehicle's windshield.
|
Quik*Link™ III Attachment
Easily locks the blade, power angling and lift frame assembly to mounting kit assembly on vehicle using two 1"pins on both sides
|
3/8” Polyethylene Moldboard
Throws snow further and faster resulting in less resistance and vehicle wear, and improved fuel economy.
|
50" Double Plate Reinforced Quadrant
50" Double Plate Reinforced Quad and 1/4" x 2 1/2" x 2 1/2" A frame with 1" greaseable king bolt gives this plow tremendous strength
|
Double lift chains for HDXL Plow
For Extra lift, strength and safety
|
Dish-Shaped Skid Shoes
Improve surface clearance while plowing forward.
|
