 Hydraulic Film Cutter
- On the Kverneland 7710, 7730 and 7740 a hydraulically operated film cutter cuts and holds the film in position ready to wrap the next bale.
- An easy to use solution without the need to manually control the operation.
|
 Turntable Principle
- Two large diameter rollers, both of which are driven, ensure bale rotation even in the most difficult conditions.
- Four endless belts carry and rotate the bale evenly during wrapping with no risk of film damage.
- The two large diameter conical side support rollers ensure that the bale is kept in a central position on the rotating table during wrapping operation.
|
 The Pre-Stretcher
- Kverneland pre-stretchers provide even film stretch throughout the roll, are easy to operate and require low maintenance.
- The unique pre-stretch roller profile keeps the stretched film at its optimum width and results in fewer problems with film tear.
- The rollers are made of aluminium which avoids the build-up of tack from the film, which can result in overstretch of film and film tear.
- Specially profiled rollers help to disperse air and water as the film is being stretched.
- Change of film roll is quick and easy with Kverneland pre-stretchers. The empty core is released by pushing down a single lever with one hand.
- Low lifting height of the film rolls is achieved thanks to the low profile design of all Kverneland bale wrappers.
|
 Control Options
Computer Control (C)
- The computer controlled Model C turns the wrapper into a fully automatic machine offering either a fully automatic operation or a choice of manual override or function by function operation.
- Choose for example that you want the bale to wrap automatically off. One operator does the entire process of loading, wrapping and stacking when loaded, but remain on the wrapping
- table until you confirm that you want to offload.
|
