A User-Friendly Trailed Pull-Type Disc Mower
The all-new Kverneland 4132 L and 4140 L are easy to operate and have a low power requirement which reduces the fuel consumption and therefore allow the mowers to be used with smaller tractors. Based on a responsive floatation system these mowers have a remarkable ability to adapt to the ground structure which improves the grass flow and provides a gentler handling of the crop. It also protects the cutterbar from unforesseen obstacles which may occur. Kverneland 4132 L and 4140 L have a sideward adaption which allows a movement up and down of 8.5° to each side – in total 17°. |
|
The Advantages
|
- Working width: 3.16m and 3.92m
- Responsive Floatation ensures an even pressure across the entire cutterbar in uneven conditions
- Easy to connect to every tractor
- Outstanding ground following ability
- Fully welded cutterbar with round discs
|
|
Technical Specifications
|
| |
Working Width |
Weight |
Power Req., Min |
| 4132 L |
3.16m |
1220kg |
48/65 kW/hp |
| 4140 L |
3.92m |
1340kg |
63/85 kW/hp |
|
|
 Responsive Floatation
- Exceptional ability to adapt to the ground conditions
- Ensures an even pressure across the entire cutterbar in uneven conditions
- The range is 350mm (1’2”) upwards and 235mm (9”) downwards
|
|
 Sideward Adaption
- Sideward adaption which allows a movement up and down of 8.5° to each side – in total 17°
- Generates many benefits when working on hillsides or along ditches, and also makes it easier to control the unit on headlands
|
|
 Swivel Hitch Gearbox
- The gearbox is fixed to the mainframe in order to ensure less movement during operation
- Provides unlimited rotational movement between the machine and the tractor
- Makes it easier to perform sharp turns
|
|
 Cutterbar with Round Discs
- Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
- Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
- The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
- The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
- The fully welded cutterbar gives a very stiff and strong design for high durability.
- With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.
|
|
|
