|
Description
|
Features
|
-
The H&S X-15 Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of the crop.
-
The variable main frame width adjustment opens symmetrically. Hitch height and beam fore and aft tilt are controlled by a simple ratchet jack.
-
Hydraulic adjust beam angle as standard equipment.
-
Tandem ST175/80D13 tires w/rims are standard equipment.
-
The X-15 Rake has a proven ground pressure system and rake arm design.
-
The X-15 Rake has 100% coverage, there is no need for center kicker wheels. The 3 wheel extension can be locked up if not needed.
-
One side raking can be done with the right or left side.
-
The hydraulic beam angle kit adjusts right and left beam angles.
-
An electric-over-hydraulic toggle switch adjusts the left and right beam angle – the neutral position of the toggle switch adjusts main frame width.
-
Optional rake wheel wind boards help to keep the crop from wrapping on the rake wheels.
-
Work lights are optional.
|
|
Specifications
|
|
|
|
X-15 |
|
|
WHEEL DIAMETER |
55" |
|
TEETH PER WHEEL |
40 |
|
TOOTH DIAMETER |
7mm (.275") |
|
RAKE WHEEL HUBS |
Tapered Roller Bearings |
|
TRANSPORT WIDTH |
10' 4" |
|
TRANSPORT LENGTH |
31' 6" |
|
WINDROW WIDTH ADJUSTMENT |
Up to 46" |
|
RAKING WIDTH |
Up to 25' |
|
HITCH JACK |
Standard |
|
STANDARD TRANSPORT WHEELS |
(4-Tandem) ST175/80D13 |
|
WEIGHT |
3023# |
|
RAKE WHEEL WIND GUARDS |
Optional |
|
TRANSPORT LIGHTS |
Optional |
|
HORSEPOWER REQUIREMENTS |
40 (30kW) |
|
HYDRAULIC REQUIREMENTS |
1 Double acting remote for main frame open and close. 1 Single acting remote for rake wheel lift. |
|
ELECTRICAL REQUIREMENTS |
+ 12 volt power source for hydraulic beam angle kit. |
|
|
|
|
|
