Phone(s):

Fisher XV2™ V-Plow

Specifications

Model	XV2™ V-Plow	Category Name	Equipment	Year	2020
Sale Type	New	Manufacturer	Fisher	Price	Contact for price CAD

Description

Tougher Than Winter

When winter gets tough, get even tougher with the FISHER® XV2™ v-plow. Built to power through any storm, the FISHER XV2 v-plow comes equipped with extreme flared wings—up to 45"—and double-acting cylinders to easily handle anything thrown in its path. Plus, it’s qualified for vehicles up to Class 6, so it’s as versatile as it is hardworking.

Plow Blade Construction

The XV2 v-plow features extreme flared wings that soar from a 35" center height up to 45" at the outer edge on 10' 6" models. The XV2 v-plow is available in premium, corrosion-resistant stainless steel in 7' 6", 8' 6", 9' 6" and 10' 6" widths, and in powder coated steel in 8' 6", 9' 6" and 10' 6" widths.

The blade comes standard with a 6", high carbon steel cutting edge, providing increased wear resistance and a clean scrape.

An aggressive, 70-degree attack angle enhances scraping and back dragging, making it ideal for asphalt and paved surfaces, and for scraping up ice and hard-packed snow.

Structural Reinforcement

The XV2 v-plow features our exclusive x-bracing design which is constructed from four vertical ribs and eight x-bracing ribs. Both the ribs and the boxed steel tube reinforce the blade for structural integrity and exceptional torsional strength.

A 1¼"-diameter, heat-treated steel center pin resides within a three-connection-point hinge for added strength and rigidity.

Trip Protection

Each v-plow blade features independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.

The FISHER® trip edge uses compression-type springs that never require adjustment and will not wear out like extension springs.

Double-Acting Cylinders

InstaLock double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.

Center Snow Control

For exceptional snow containment in all positions, the XV2™ v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow.

10' 6" Heavy-Duty Features

The 10' 6" XV2 v-plow model comes standard with specific heavy-duty features.

Blade Construction

Thicker moldboards and a more robust base angle with additional hinge points.

Heavy-Duty T-Frame

Features solid, one-piece construction from front to back and an oscillating pivot bar.

Standard Blade Angle Stops

Made of reinforced 3/16" high-strength steel tube, the blade stops reduce stress and wear on the blade.

Standard Curb Guards

Constructed of abrasion-resistant material and designed to fit tight to the blade, the curb guards protect the outer edge of the plow from wear when plowing along sidewalks and curbs.

Specifications

Model	7' 6" SS	8' 6" PC or SS	9' 6" PC or SS	10' 6
Blade Width	7' 6"	8' 6"	9' 6"	10' 6
Blade Height	37" at end 31" at hinge	38" at end 31" at hinge	31" at center 39" at end	35" at center 45" at end
Blade Gauge	14	14	14	11 PC* 12 SS*
Trip Springs	4	4	6	6
Ribs	12	12	12	12
Approx. Weight*	914 lb	957 lb	1044 lb	1,222 lb
Lift Cylinder	1¾" x 10"	1¾" x 10"	1¾" x 10"	1¾" x 10"
Angling Rams	1¾" x 11"	1¾" x 11"	1¾" x 11"	2" x 11"
Plowing Width (full angle)	6' 7" full angle 6' 4" scoop 6' 10" full V	7' 5" full angle 7' 2" scoop 7' 8" full V	8' 6" full angle 8' 2" scoop 8' 7" full V	9' 9" full angle 9' 7" scoop 9' 11" full V
Cutting Edge	3/8" x 6" 1/2" x 6"**	3/8" x 6" 1/2" x 6"**	1/2" x 6"	1/2" x 6"
Mount Type	Minute Mount® 2	Minute Mount® 2	Minute Mount® 2	Minute Mount® 2