|
Description
BIG DOG REAR UNLOAD FORAGE BOX.
-
PL88C open barrel pintle chain @ 29,900# per strand = 119,600#, w/2" x 1" x 3/16" formed apron channels for apron cross bars.
-
Top Pivot Door w/Air Gate Delay.
-
The “BIG DOG” features 1” steel lines to the back of the box and DUAL HYDRAULIC MOTORS. The motors evenly drive each final drive system for more power and less shaft stress than a single motor system.
-
The drive shaft features MD nylon reversible style bearings.
-
16 Gauge Stainless Steel Sides.
-
Large 17” x 28” front window for viewing when unloading.
-
The idler apron shaft assembly features 6 tooth machined steel sprockets with bronze idler bushings.
-
Apron tension adjustment is made by tightening the 4 spring loaded tightener bolts on the front of the box. The spring loaded tighteners maintain tension on the apron during start up and operation.
-
Spring Loaded Main Apron Tighteners.
-
LED Lighting and Door Locks.
-
Available with an Optional Rollback or Side to Side Tarp.
|
|
Features
|
|
 Main Apron Tighteners
Spring Loaded Main Apron Tighteners
|
|
 Pintle Chain
PL88C open barrel pintle chain @ 29,900# per Top Pivot Door w/Air Gate Delay strand = 119,600#, w/2" x 1" x 3/16" formed apron channels for apron cross bars. 16 Gauge Stainless Steel Sides
|
|
 Drive System
Dual Hydraulic Motor Drive System
|
|
 Main Apron Chain
The PL88C Open Barrell main apron pintle chain @ 29,900# per strand stays flexible. 2 x 1 x 3/16 formed apron channels are used for the apron cross bars. The floor is thick virgin grade solid poly. A stainless steel center between aprons that is formed to eliminate any feed build-up for a complete clean out.
|
|
LED Lighting
LED Lighting is standard on the BIG DOG.
|
|
 Drive Shaft
The drive shaft features MD nylon reversible style bearings.
|
|
|
|
|
