F-41Stinger

Easily load to the left or right, the stinger raises up to a height of 18.5’ (5.6 m) with a length of 18’ (5.5 m) and offers 280° rotation with a 4 m minimum reach. The modular design is convertible from the side loading to a trailed loading configuration.

Folds down safely for transport to a height of less than 3 m and is fully supported on an integrated hydraulic accumulator suspension for a smooth ride in the field and down the road.

A dedicated, fully integrated heavy-duty transition base is installed on all F41 STINGER harvesters.

The stinger is fitted with abrasion-resistant steel Hardox 450 and Domex 100 liners. These are fully replaceable with direct
access from the top.

The F41 Stinger is equipped with, two section bi-fold deflector, standard wide-angle day and night camera.

7 inch in-cab color monitor, LED spot light and electrohydraulic cab controls for all three functions (height, rotation and
deflector angle).

Requires one additional close-circuit hydraulic SCV (pressure compensated or load-sensing pump) with flow control adjustable to 2.5 gpm.

The cutterhead is a massive 24” (69 cm) wide by 22” (56 cm) diameter. This mammoth 450 lb (205 kg) cutterhead features full width, 5/8” (16 mm) thick, 2-1/2” (64 mm) wide, solid steel, knife supports to securely fasten the 12 full width tungsten carbideedges knives. Normally, standard knives develop a thicker cutting edges with time. These specially designed Dion knives, wich promote ideal knife-to-shearbar angle for optimal cutting efficiency, retain their fine edge after repeated sharpening.