The DL11-44 GEN:3 Telescopic Handler is a tool to increase jobsite productivity, develop new business and improve your return-on-investment.

• Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
• 10-degree frame tilt in both directions.
• Double universal joints for tight turn radius without applying stress on the axle.
• Two-wheel, four-wheel, crab steering standard.
• Standard centrifugal pre-cleaner and two-stage air cleaner.
• Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
• Standard pneumatic tires.
• ROPS and FOPS certified operator's compartment.

Power (kW)	120 hp (89)
Maximum Travel Speed (km/hr)	22.8 mph (36.7)
Turning Radius (m)	12'2" (3.7)
Lift Capacity (kg)	11,000 lbs. (4990)

 Comfort comes standard on the DL11-44 GEN:3 Telescopic Handler, boasting 57 cubic feet of interior space.

• GEN3 F-N-R Single Joystick that allow operators precise movement of heavy loads
• Lockable, two-piece cab door for security, communication and cross-ventilation.
• Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
• Choice of canopy or cab with heating and defrosting  systems standard (air-conditioning optional).
• Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.

• Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
• Industry loading job site maneuverability with a 12' 2" turning radius.

The DL11-44 GEN:2 Telescopic Handler has the hydraulic power to get the job done.

 

 

 

 

 

 

 

Pump Type	Open-Center, Dual-Section
Total Capacity (L/min)	43 gpm (162.8)
Main Relief Pressure (bar)	3,000 psi (207)
Auxiliary Relief Pressure (bar)	2,500 psi (172)
Hydraulic Reservoir Capacity (L)	45 gal. (170)

There is a tool for every job, and the DL11-44 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

 

A	Carriages – Masonry, framing and standard carriages available in different widths.
B	Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C	Fork Shift - 48" (1219 mm) wide.
E	Swing Carriage – 90° and 180° swing.
F	Log and Pipe Grapple.
G	Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
H	Truss Boom - 12' (3.6 m) and 15' (4.5 m) with optional winch.