The model RS10-44 GEN:3 is built with high quality components, which provides the performance to get the job done.

• Boom tip lift hook option is now available as a factory-installed option or field installed option.
• Proven welded box-section boom design makes the boom stronger than competitive models.
• Cylinder design provides one of the fastest cycle times in the industry.
• Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
• Internal wet disc brakes provide excellent braking and long life.
• Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.

The RS10-44 GEN:3 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity.

• Large cab enclosure provides optimal leg room and a spacious operating environment.
• ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
• Virtually 360-degree visibility increases safety and operating accuracy.
• Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
• Side and rear glass is standard equipment.

Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.

• In 4-wheel steer, the machine has a 13' 11" turning radius for machine positioning on tight job site.

Turning Radius (m)           13'11" (4.24)

The model RS10-44 GEN:3 has outstanding hydraulic system and control performance..

• Dual-function, pilot-assisted joystick is standard equipment.
• Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds.
• Auto-leveling feature keeps loads level when raising/lowering the boom.

 

 

 

 

 

 

 

 

 

Pump Type	Gear
Total Capacity (L/min)	41.5 gpm (157)
System Pressure (bar)	3,000 psi (207)
Hydraulic Reservoir Capacity (L)	45 gal. (170)

 

There is a tool for every job, and the RS10-44 GEN:3 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

 

A	Carriages – Masonry, framing and standard carriages available in different widths.
B	Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C	Fork Shift - 50" (1270 mm) wide.
D	Personnel Work Platforms - 180° swing platform and 48” x 50” x 114” (1219 mm x 1270 mm x 2895 mm) platform.
E	Swing Carriage – 90° and 180° swing.
F	Log and Pipe Grapple.
G	Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
H	Truss Boom - 15' (4.5 m) with optional winch.

Plenty of access points and over-sized covers make service and maintenance on the RS10-44 GEN:3 a snap.

• Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
• Side-mounted fuel tank with battery access and an additional storage compartment.
• Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
• Shorter hoses from main valve to boom provide neat hose routing, enhancing serviceability.