|
Description
|
RS6-34 GEN:3
Telescopic Handler
- Rated Lift Capacity (kg): 6,000 lbs. (2722)
- Gross Power (kW): 74 hp (55)
- Maximum Lift Height (m): 34' 3" (10.4)
- Maximum Forward Reach (m): 23' 3" (7.0)
|
|
Performance
|
The model RS6-34 GEN:3 is built with high quality components, which enhance performance on all levels.
-
Welded box-section boom design for maximum load placement ability.
-
Well-thought-out cylinder design provides one of the fastest cycle times in the industry.
-
Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
-
Internal wet disc brakes provide excellent braking and long life.
-
Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.
|
|
Operator's Cabin
|
The RS6-34 GEN:3 Telescopic Handler features spacious, modern operator stations to maximize comfort and productivity.
-
44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
-
ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
-
Virtually 360-degree visibility increases safety and operating accuracy.
-
Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
-
Side and rear glass is standard equipment.
|
|
Handling
|
In 4 wheel steer the machine turn radius can be as small as 12' 6" for machine positioning on tight job sites.
-
Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
Turning Radius (m) 12'6" (3.8)
|
|
Engine
|
The RS6-34 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently.
-
Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.
-
Dana three-speed power-shift transmission is easy to maintain.
-
Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
|
Manufacturer |
Deutz |
|
Model |
TD 3.6 Tier IV |
|
Power (kW) |
74 hp (55) |
|
Maximum Travel Speed (km/hr) |
20.2 mph (32.5) |
|
Rated Speed |
2,300 rpm |
|
|
Hydraulics
|
The model RS6-34 GEN:3 has the hydraulic system power to get the job done.
-
Dual-function, pilot-assisted joystick is standard equipment.
-
Optional tri-function, pilot-assisted joystick allows the operator to set variable tilt and auxiliary function speeds.
-
Auto-leveling feature keeps loads level when raising/lowering the boom.
|
Pump Type |
Gear |
|
Total Capacity (L/min) |
29 gpm (110) |
|
System Pressure (bar) |
3,000 psi (207) |
|
Hydraulic Reservoir Capacity (L) |
29 gal. (110) |
|
|
Attachments
|
There is a tool for every job, and the RS6-34 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.
|
A |
Carriages – Masonry, framing and standard carriages available in different widths. |
|
B |
Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide. |
|
C |
Fork Shift - 50" (1270 mm) wide. |
|
D |
Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable. |
|
E |
Bucket - Light Material - 76" (1.3 cu.yd) |
|
F |
Work Platform - 4' x 9.5' - Fork Mounted (requires PWP) |
|
G |
Carriage - Side Shift 48" wide |
|
H |
Truss Boom - 8' long |
|
I |
Auger Drive and 9' - 12' - 18' diameter augers |
|
|
Serviceability
|
Plenty of access points and over-sized covers make service and maintenance on the RS6-34 GEN:3 quick and efficient.
-
Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
-
Side-mounted fuel tank with battery access and an additional storage compartment.
-
Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
-
Shorter hoses from main valve to boom provide neat hose routing, enhancing serviceability.
|
|
|
