MOWER COMBINATIONS WITH ISOBUS CONTROL SYSTEM

Advanced machine technology coupled with a state-of-the-art ISOBUS equipment control system make the FELLA mower combination with conveyor belt stand out from the rest. The high-output machine models SM 8312 TL-KCB with tine-rotor conditioner, SM 8312 TL-RCB with roller conditioner and SM 9314 TL-KCB with tine-rotor conditioner are now available to buy. Working widths of 8.30 m and 9.30 m allow large volumes of forage to be processed efficiently. You benefit from greater convenience coupled with increased output.  

Additional features afford benefits that can only be described as compelling: Centring springs on the mower units ensure that the mower is raised and set down parallel to the ground. There will be minimal Impact on your sward, and the raw ash content in the basic forage remains low.
The trailed hitch attachment of the mowers enables you to mow your green forage with minimal impact on the ground, whilst also being economical with fuel. This makes the mower combinations particularly interesting from the point of view of cost effectiveness.

ISOBUS – SIMPLE AND SAFE TO OPERATE

With the ISOBUS equipment control system, you have a clear view of all important machine parameters on your tractor terminal at all times. You can easily control the individual functions
at the touch of a button. All mower functions, such as single lift, conveyor belt operation and slope function, can be operated using a control terminal, and can be programmed, if necessary, on the control lever or joystick. Switching between the working position and the transport position is completely automated.  

Sensors are used to monitor the rotational speed, which allows you to anticipate – from the driver’s seat – possible overloading of the power train. This benefits you by placing less stress
on your mower combination.  

A computer-assisted automatic folding function with hydraulic transport lock allows for easy changing to the transport position, and protects the machine’s power train from damage.

WIDE BELT WITH INTEGRATED BEMOVE HYDRAULIC LATERAL MOVEMENT

For the FELLA mower combinations, our engineers have developed a particularly wide conveyor belt (940x2,700 mm) that can be used for processing larger volumes of forage without any difficulty, and for continuous running at higher working speeds.
 

BEMOVE HYDRAULIC LATERAL MOVEMENT

Using the beMOVE hydraulic lateral movement and the conveyor belt‘s speed setting, you can always optimally adjust the mower‘s swath width to the working conditions and the collecting machines following behind, all from the comfort of the driver‘s seat. Even with large quantities of forage, swaths are gathered together perfectly.
 

AUTOMATION WITH BENEFITS

By combining the front-mounted mower and the rear units, it is possible to fully automate the work processes. Hour and hectare counters with integrated part-width shut-off can be used by agricultural contractors for the purposes of data exchange and monitoring, which significantly reduces the workload.
 

At a glance:

• Working widths of 8.30 m and 9.30 m
• Floating cut – TurboLift system
• SafetySwing impact guard
• Trailed cutter bar hitch attachment – pulling is easier than pushing
• Operation of all mower functions via the ISOBUS control system
• Rotation speed monitoring
• Wide beMOVE conveyor belt with integrated hydraulic lateral movement
• Central, single or partial swath deposit thanks to conveyor belts
  that can be raised individually
• ComfortChange quick-change blade system as standard, to safely replace
  blades without losing too much time
• Retrofit kit available for non-ISOBUS-compatible
  tractors