|
Description
Zirkon 10
The rotary harrow for maximum constant load in all tilling procedures
The Zirkon 10 is suitable for maximum constant load both in conventional and conservation-tillage procedures. The active tools of the Zirkon 10 prepare an optimum seedbed in almost all soil conditions up to a working depth of approximately 15 cm. The intensity of preparation can be specifically adjusted by selecting appropriate combinations of forward travel speed, PTO speed, and the transmission setting of the rotary harrow. |
-
The permanently welded gear trough made from hardened, thick-walled steel, ensures the smooth and quiet running of all gears, shafts and bearings. This, in turn, guarantees a long operational life.
-
The DUAL-Shift transmission enables simple adjustment of the tine speed from 330 to 440 rotor revolutions per minute. In addition, the rotational direction of the tines can be changed simply by shifting the transmission from “Grip” to “Drag”. As such, the machine is easy to adjust to all usage conditions.
-
The quick-change tine with a length of 340 mm, and a thickness of 20 mm, guarantees maximum life span. The quick-change system ensures easy replacement of the tines with no tools required.
-
For models with large working widths, the centrally located swing axles enable optimum adaptation to the ground contours.
-
The Zirkon 10 can be specified for use at the front or rear of the tractor.
|
|
Technical Data
|
|
Zirkon 10 mounted, rigid
|
Type |
10/300 |
10/350 |
10/400 |
|
Working width (cm) |
300 |
350 |
400 |
|
Weight (kg)¹ |
922 |
1.035 |
1.149 |
|
kW |
66 - 154 |
77 - 165 |
88 - 176 |
|
HP |
90 - 210 |
105 - 225 |
120 - 240 |
|
Up to PTO rpm (min-1) |
1.000 |
1.000 |
1.000 |
|
Rotor speed (min-1) at 1.000 min-1 |
330/440 |
330/440 |
330/440 |
|
|
Standard equipment
|
-
Lower link attachment: Cat. 3N=L2 Z3
3 m: or Cat. 2
3 m - 4 m: or Cat. 3
-
Toolboxes with tools
-
PTO shaft with torque limiting clutch for 540 and 1000 PTO
-
Two-speed change gear box with changing turning direction
-
Carriers for track markers and wheelmark eradicators
-
Rear PTO 1 3/8“ - 6 splines
-
Specially hardened quick-change tines SZ 34 set to drag position (option to grade position)
-
Spring-loaded side shields adjustable in height
-
Without roller
|
|
|
