|
Brine Pro™ 2000
Now, just about anyone can make brine. That’s because the Brine Pro™ 2000 brine maker simplifies production with user-friendly operation, automatic salinity control and easy no-splash salt refilling. Basically, it removes all guesswork from the process, helping contractors confidently take brine making into their own hands. Plus, the system is compatible with low-flow water input and 220VAC electrical sources that are available in most shops. It doesn’t get any easier than this.
|
|
Brine Pro™ 2000
|
Touch-Screen Controls
-
Intuitive full-color touch-screen interface.
-
3 modes: automatic, batch and cleaning.
-
Multilingual display capabilities.
Hammer Mill Salt Grinder
-
Receives material from the unique flow control system.
-
Grinds salt to a consistent particle size and delivers it to the mixing chamber.
-
Accelerates the dissolve rate.
-
Expedites the clean-out process.
|
|
Features
|
|
 Touch Screen Controls
Even the controls on the Brine Pro are simple. The touch-screen interface makes it easy to set the unit for automatic, batch or cleaning mode.
|
|
 Vertical Reinforcement Ribs
Six vertical ribs support the back of the blade to add strength and protect against twisting.
|
|
Automatic Salinity Control
In order for brine to be effective, it needs to have the correct amounts of salt and water. Thanks to automatic salinity control on the Brine Pro, the operator can sit back and let the machine do all the work.
|
|
 Material Flow Control
Precise salt delivery is key to an effective brine mixture. The unique material flow control on the Brine Pro uses a rotary vane feeder to accurately measure out the correct amount of salt to bring to the grinder.
|
|
 Mixing Chamber
The mixing chamber includes a high-volume circulation pump. This feature helps ensure a uniform brine mixture up to 1,050 gallons per hour (3,974.7 L/h).
|
|
 Dry Hopper System
The Brine Pro offers a no-splash solution for adding salt. Unlike most other brine makers, you don’t have to dump salt into the mixing chamber. Just add it into the 1-cubic-yard dry hopper, and the Brine Pro will take it from there. The hopper offers visual salt level indication, letting you know when it’s time to refill.
|
|
.jpg "Full-Trip Moldboard") Easy Clean-Out
Special cleaning mode allows for simple draining of the mixing chamber between batches.
|
|
xxxx |
|
Imperial |
Brine Pro 2000 |
|
Empty Weight |
1,520 lb |
|
Overall Length |
100" |
|
Overall Height |
89" |
|
Overall Width |
86" |
|
Mixing Tank Capacity |
265 gal |
|
Brine Tank Capacity |
285 gal |
|
Hopper Volume |
1 cu yd |
|
Brine Production |
Up to 1,050 gal/h |
|
Inlet Flow Rate |
Up to 15 gpm |
|
Electrical Connection |
220VAC, single phase |
|
Auger Motor |
1/3 hp, 3-phase variable speed motor with transmission |
|
Hammer Mill Motor |
2 hp single phase |
|
Circulation Pump |
5 hp single phase, 210 gpm, centrifugal circulation pump |
|
Discharge Pump |
1 hp, greater than 66 gpm @ 10' head height, fully stainless steel |
|
Controller |
4-mode automatic computer controlled; touch-screen |
|
Salinity Sensors |
Toroidal conductivity sensor |
|
Frame |
Powder coated steel & stainless steel components |
|
Hopper |
One-piece LLDPE safety yellow poly |
|
Vibrator |
Standard, industrial electric 220V |
|
Top Screen |
5/16" steel rod construction with grid pattern |
|
Mixing Tank |
One-piece LLDPE safety yellow poly |
|
Brine Tank |
One-piece LLDPE safety yellow poly with sloped bottom for clean-out |
|
Auger |
Rotary vane feed system |
|
Hammer Mill/Grinder |
Stainless Steel |
|
|
Metric |
Brine Pro 2000 |
|
Empty Weight |
680.38 kg |
|
Overall Length |
254 cm |
|
Overall Height |
226 cm |
|
Overall Width |
218.44 cm |
|
Mixing Tank Capacity |
1,003 L |
|
Brine Tank Capacity |
1,078.8 L |
|
Hopper Volume |
0.765 cu m |
|
Brine Production |
Up to 3.975 L/h |
|
Inlet Flow Rate |
Up to 56.8 L/min |
|
Electrical Connection |
220VAC, single phase |
|
Auger Motor |
1/3 hp, 3-phase variable speed motor with transmission |
|
Hammer Mill Motor |
2 hp single phase |
|
Circulation Pump |
5 hp single phase, 795 L/min, centrifugal circulation pump |
|
Discharge Pump |
1 hp, greater than 249.8 L/min @ 3.05 m head height, fully stainless steel |
|
Controller |
4-mode automatic computer controlled; touch-screen |
|
Salinity Sensors |
Toroidal conductivity sensor |
|
Frame |
Powder coated steel & stainless steel components |
|
Hopper |
One-piece LLDPE safety yellow poly |
|
Vibrator |
Standard, industrial electric 220V |
|
Top Screen |
0.8 cm steel rod construction with grid pattern |
|
Mixing Tank |
One-piece LLDPE safety yellow poly |
|
Brine Tank |
One-piece LLDPE safety yellow poly with sloped bottom for clean-out |
|
Auger |
Rotary vane feed system |
|
Hammer Mill/Grinder |
Stainless Steel |
|
