The Weidemann benefits at a glance

Weidemann articulated pendulum joint

The backbone of the Weidemann design. The legendary articulated pendulum joint. All four wheels remain in constant contact with the ground and the machine moves with maximum traction. In addition, the machine has unrivalled manoeuvrability.

High quality powder coating

Quality creates added value. The powder coating is a key feature of the Weidemann quality standard. In contrast to the conventional wet painting, it greatly increases the service life and is more efficient and also environmentally friendly in the process.

High shear forces from planetary axle

The drive via the planetary axle increases the torque on the wheel and thereby improves the shear force. Due to the optimal ratio between the shear force and machine capacity, you work flexibly and economically at the same time.

100% differential lock

If necessary, the up to 100% connectable differential lock offers you maximum traction shear forces and keeps the tire wear low (switched off during normal operation).

Sturdy telescopic boom

The telescopic boom is built to be sturdy and stable. The parallel motion takes place hydraulically. All important hydraulic lines are inside and are protected against external influences. The telescopic boom for Weidemann wheel loaders combines the advantages of an articulated machine with those of a telehandler. High overhead loading heights are therefore not a problem.

Rollback angle limitation

A rollback angle limitation is installed as a standard on all Weidemann tele wheeled loaders. This is located on the Weidemann receptacle and limits the rollback angle. The retainer prevents rolling in too far with an extended or retracted telescopic arm. In this way, for example, the contents of the bucket cannot fall onto the driver's cab.

Stainless steel steering stops

At a full steering stop, the front and rear carriage of the machine touch. With Weidemann, this area is particularly well-protected by the stainless steel steering stops and the machine's paint is not damaged. This provides for value preservation!

LP = Low Position

The lower seating position of the operator allows for a lower overall height of the machine. This makes low passages no problem, even with a permanently mounted overhead guard or a cabin.

Good accessibility for all LP models

The driver’s seat can be removed and the engine hood can be opened backward widely. This makes the engine, hydraulic system and electrical system easily accessible for our LP models.