Tired of driving in reverse when blowing snow? Try our pull type versions, built with the same specifications as our regular single auger snowblowers, but in a pull type configuration. All models come standard with hydraulic chute rotator (cylinder or orbital motor depending on model) and single section spout deflector.
| MODEL SIZE | S5PT | S6PT | S65PT | S7PT | S75PT | S100PT |
| Approx. Weight (Lbs.) | 560 | 595 | 885 | 920 | 995 | 1410 |
| Cutting Width | 60 | 72 | 78 | 84 | 90 | 100 |
| Cutting Height | 24 | 24 | 30 | 30 | 30 | 33 |
| Fan Shaft Diameter | 1 3/8 | 1 3/8 | 40 mm | 40 mm | 40 mm | 1 3/4 |
| Fan Blades | 4 | 4 | 4 | 4 | 4 | 4 |
| Fan Diameter | 22 | 22 | 26 | 26 | 28 | 28 |
| Fan Housing Width | 8 | 8 | 8 | 8 | 8 | 12 |
| Fan Housing (thickness) | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 10 ga. | 3/16 |
| Auger Diameter | 14 | 14 | 17 | 17 | 17 | 20 |
| Auger Shaft Diameter | 1 1/4 | 1 1/4 | 1 7/16 | 1 7/16 | 1 7/16 | 1 7/16 |
| Auger Flighting Thickness | 5/16 | 5/16 | 1/2 | 1/2 | 1/2 | 1/2 |
| Auger Chain Size | #60 | #60 | #60 | #60 | #60 | #80 |
| Chute Diameter | 12 | 12 | 12 | 12 | 12 | 13 |
| Chute Length | 36 | 36 | 48 | 48 | 48 | 48 |
| Hydraulic Chute Rotator | Stan. | Stan. | N/A | N/A | N/A | N/A |
| Orbital Chute Rotator | Opt. | Opt. | Stan. | Stan. | Stan. | Stan. |
| Spout Deflector (single) | Stan. | Stan. | Stan. | Stan. | Stan. | Stan. |
| Hitch Category | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 2 |
| Recommended H.P. (min) | 20 | 20 | 35 | 40 | 50 | 80 |
| Recommended H.P. (max) | 35 | 35 | 70 | 70 | 90 | 105 |
Unless otherwise indicated, all dimensions are in inches with standard equipment installed. Specifications subject to change without notice. Certain features shown may be optional.
|
Single Section Spout Deflector
Control where you want the snow to be blown |
|
Standard on S65 to S100 PT models |