The LSC stand up compact forklift makes stacking and dock work very easy. The short turning radius, high visibility mast and compact design help operators move materials at maximum efficiency.
The LSC is excellent for manufacturing and warehouse environments, and efficiently works on the dock for loading/unloading trailers and containers; in bulk storage; drive-in rack, push-back rack and anywhere that loads need to be moved quickly and efficiently. The light weight of the LSC makes it suitable for multi-floor warehouses. The narrow width and short length make it possible to work in less space than any other stand-up model on the market today. The battery compartment has Teflon slides for easy slide-out from the left or right side of the truck. The narrow overhead guard is set up to work in narrow drive-in rack aisles.
Ergonomic Design
The low step height provides easy access on and off the truck for order picking and load checking. The optimized operator controls make the LSC comfortable, convenient and safe for the operator. A single joystick directional, acceleration and lift/lower control makes for easy operation and comfort for the driver. A parking brake is automatically applied and power to the traction motors are disconnected when the operator removes the foot from a deadman pedal.
Features
STANDARD EQUIPMENT
Two or Three Stage High Visibility Mast
2,500 lb. (1136kg) or 3,000 lb. (1364kg) Capacity
Multi Function Control for Lift/Lower, Direction and Speed Control
Single 24 Volt AC Traction and DC Pump Controller
Tiller Controlled Hydraulic Power Steering
Cantilevered Overhead Guard
Thick Cushioned Rubber Floor Mat
Horn, Battery Discharge Indicator and Hour Meter
Left Foot-Operated Electric Deadman Parking Brake
Right Foot-Operated Hydraulic Front Wheel Service Brakes
10" x 5" (250mm x 127mm) Smooth Poly Rear Drive/Steer Tire
14" x 5" (356mm x 127mm) Smooth Poly Front Load Tires
Easily Removable Covers for Access to all Major Components
Easily Replaceable Hydraulic Filter Element
Battery Compartment Can be Set Up for Left or Right Removal
Battery Compartment Slide Strips for Easy Side Removal
36" (914mm) High Load Backrest and 34" (864mm) Wide Fork Carriage
42" (1067mm) Tapered Forks
3 Spool Hydraulic Control Valve
Meets ANSI B56.1 Requirements
Specs
Specification
Dimension
State
U/M
LSC25
LSC30
Capacity
At 24" (600mm) Load Center
lbs/kg
2500 / 1136
3000 / 1364
Truck Weight
with Battery
lbs/kg
6750 / 3068
6600 / 3000
Travel Speed
Loaded
mph/kph
6 / 9.7
6 / 9.7
Unloaded
mph/kph
7 / 11.3
7 / 11.3
Lift Speed
Loaded
fpm/mpm
35 / 11
35 / 11
Unloaded
fpm/mpm
62 / 19
62 / 19
Lowering Speed
Loaded
fpm/mpm
90 / 27.4
90 / 27.4
Unloaded
fpm/mpm
80 / 24.3
80 / 24.3
Mast Tilt
Back / Fwd - Simplex Mast
degrees
8 / 5
8 / 5
Back / Fwd - Triplex Mast
degrees
5 / 5
5 / 5
Lost Load Center
E
in/cm
10.7 / 27
10.7 / 27
Wheelbase
F
Mast Vertical
in/cm
34.6 / 88
40.6 / 103
Rear Overhang
G
in/cm
14.4 / 37
14.4 / 37
Overall Length to Face of Forks
H
Mast Vertical
in/cm
59.7 / 152
65.7 / 167
Underclearance
I
in/cm
3 / 7.7
3 / 7.7
Operator Floor Height
J
in/cm
10.5 / 27
10.5 / 27
Overhead Guard Height
K
in/cm
87 / 221
87 / 221
Overall Width
L
in/cm
37 / 94
37 / 94
Fork Carriage Width
M
in/cm
34 / 86
34 / 86
Fork Length
N
in/cm
42 / 107
42 / 107
Out to Out Fork Spread
O
Minimum/Maximum
in/cm
9.4-32.5 / 24-83
9.4-32.5 / 24-83
Outside Turning Radius
P
in/cm
50 / 127
56 / 142
Right Angle Stacking Aisle
Q
with 48” L x 40” W (1200mm x 1000mm) Load
in/cm
114 / 290
120 / 300
Battery Compartment Height
R
Floor to Top of Slider Bars
in/cm
15.5 / 39
15.5 / 39
Equal Intersecting Aisle
S
Mast Vertical with 36” (914mm) Forks
in/cm
57.4 / 146
59.5 / 151
Gradeability
Loaded / Unloaded
%
7 / 12
7 / 12
Hydraulic Motor Rating
Continuous Duty Rating
type/kwh
DC / 3
DC / 3
Traction Motor Rating
Continuous Duty Rating
type/kwh
AC / 4 KWH
AC / 4 KWH
Traction Control Type
Induction
AC
AC
Hydraulic Control Type
Series
DC
DC
Wheel Sizes
Front 2 Each Poly-Dia x face Rear 1 Each Poly-Dia x face
Increased Productivity
Landoll-LSC-Stand-UpForklift-Printable-0515.pdf
