It appears that software on your computer is blocking JavaScript.
Please configure your security software or browser plugins to allow this
website to load JavaScript.
ID # 13618427
Landoll Traveling Tail Model 930D
Overview
930 - Maximize Payload and Profitability
The Landoll 930 Traveling Tail is part of the 900 Series trailers. The tail is capable of lifting 24,000# up to 53" dock height. Maximize your loads by utilizing the entire deck and maximize your payload by having the undercarriage five feet behind the main hinge. The longer wheelbase gives you proper weight distribution between tractor and trailer and fully supports the tail.
The traveling tail concept allows for stable dock loading and increases your payload by having a longer wheel base.
Features
Standard Equipment *Capacity: 70,000 lbs. Deck Rating: 50,000 lbs. in 10' Estimated Base Weight: 16,300 lbs. (48') Main Frame: Fabricated 80,000 PSI Yield 4-Beam Design Crossmembers: 4" Junior I-Beam on 8" Centers Slope Drop: 90° Parking Stands: Jost Two-Speed Tires: 235/75R 17.5 LRH Double Coin Rims: 17.5x6.75 Tubeless Wheels: Hub Pilot / Steel Outboard Brake Drums Axles: 2 - 25,000 lb. Tandem Dual Tire, Oil Bath Bearings Suspension: Neway RLU228 Air Ride 22,500 lb. Capacity with Manual Dump Valve Brakes: 12.25x7.5 Full Air / Spring Brakes ABS, 4S2M Oil Seal Hubs: Internal Mated Assembly Hitch: Fifth-Wheel Kingpin Pin Setting: 18" Swing Clearance: 86" Loaded Ground Clearance; 20" Loaded Deck Height: 38" Width: 102" Decking: 1-3/8" Apitong Hardwood Air / Electrical: 7-Way Receptacle Tool Box: Twin Upper Deck Mounted with Lockable Door (7"H x 34"W x 29"D) Hydraulic Hook Up: Quick Couplers 2500 PSI / 14 GPM Lights: Grote "MicroNova" LED - 10-Year Warranty Wiring Harness: Grote "Ultra-Blue Seal" - 7-Year Warranty Finish: Steel Grit Shot Blast to Bright Metal Powder Coat Color: White / Black / Yellow / Blue / Red / Green / Dark Gray / Sapphire Blue Decals: Hi-Visibility Reflective Package Tie Downs: Double Key Hole Chain Slot Gotchas w/Square Stake Pockets on 16" Centers/6 Double Keyhole Chain Slots on Tail/2 D-Rings Lower Slope at Deck Tail Lifting Capacity: 24,000 lb. Hydraulic Winch: Upper Deck 12,000 lb. Worm Gear with 85' of 1/2" Cable with Wear Plate Undercarriage: Centralized Grease System Load Angle: 11° with 15' Tail Features: Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail Hydraulic Valve Body: Rexroth 20GPM @ Control, 50GPM Max
Specs
Model
CAPACITY
BASE WEIGHT
DECK
AXLES
TIRES & PLY RATING
930D-45-12
35 Ton
17,265 lbs. (+/- 3%)
102"
2
(8) 235/75R 17.5 LRH
930D-48-12
35 Ton
17,660 lbs. (+/- 3%)
102"
2
(8) 235/75R 17.5 LRH
930D-48-15
35 Ton
18,770 lbs. (+/- 3%)
102"
2
(8) 235/75R 17.5 LRH
930D-51-15
35 Ton
19,250 lbs. (+/- 3%)
102"
2
(8) 235/75R 17.5 LRH
Specifications
Model
Traveling Tail Model 930D
Documents
Model
Traveling Tail Model 930D