The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market.

Engine with X-Torq® produces 75 % less emissions, 20 % lower fuel consumption and more power.

DuraStarter™ is a patented, dust-sealed starter attachment, where the return spring and the pulley bearing are sealed. This makes the starter virtually maintenance free, giving a further boost to the reliability of our cutters.

Ensures 50% easier starting by reducing the compression in the cylinder during starting.

All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To enable the user a comfortable operating position and to reduce strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control.

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you don’t have to pump manually.