Minimum Heat Mode Sets room temperature to 50°F, keeping temperatures above freezing and reducing power consumption. |
Auto Changeover (heating to cooling or vice-versa) Automatically alternates between heating or cooling if the room temperature falls 4 ̊F below the set temperature when cooling or rises 4 ̊F above set temperature when heating.* |
Automatic air flow adjustment The micro-computer automatically adjusts the air flow effectively to follow the changes of room temperature. |
Auto Louver: 4 Way Redirects airflow automatically with up/down and left/right motion. |
Auto Restart/Reset Following a power failure, systems will automatically restart in the same operating mode as before, once power has been restored. |
Dry Mode Allows for moisture removal in low load conditions of up to 50% of rated moisture removal capacity. |
Outdoor Unit Low Noise Limits compressor and fan speed during high speed operation for a 3 dB noise reduction. |
Powerful Operation 20 minutes of continuous operation at maximum airflow and maximum compressor speed. Rapid cooling and heating makes the room comfortable quickly. |
Quiet Mode (Indoor Unit) An extra quiet fan speed to make sure you are not disturbed. |
24 Hour Timer Allows for one on/off cycle during a 24 hour period. |
Sleep Timer Automatically adjusts the temperature while you sleep to make you more comfortable. |
Weekly Timer Allows you to set on/off time twice a day and a different on/off time by day. |
Apple Catechin Filter (polyphenol ingredient from apples) Dust, mold spores and microorganisms are absorbed onto the filter by static electricity and growth is inhibited and deactivated. 3 - 12 month life expectancy, depending on environment. |
Cold Prevention Indoor coil will warm prior to fan operating, preventing cold air during heating mode. |
Ion Deodorizing Filter Deodorizes by decomposing absorbed odors using the oxidizing and reducing effects of ions generated by fine ceramic particles. 3 year life expectancy. Wash to restore surface action. |
Remote Temperature Sensor Room temperature sensor is located in optional wired remote controller only. |
Third Party Device Control Turns system on or off using a normally closed circuit. Interface with third party devices such as home automation. |
Base Pan Heater Prevents condensate from freezing on the outdoor unit. |
Daisy Chain Ability to connect up to 16 identical style indoor units to one wired remote. |