Increased efficiency thanks to the FELLA proCONNECT ISOBUS system

flexHIGH – the faster way to produce high-quality forage

Starting - All four rotors lower to the preset rake height.

Increase travel speed - All four rotors lower below the preset rake height depending on the travel speed.

Standstill - All four rotors raise the tines above the set rake height.

The flexHIGH speed-dependent raking height adjustment function makes adjustments in response to the increasing distance between the tines and the ground that occurs as a result of the increased resistance from the forage when travelling quickly. This counteracts loss of forage at high working speeds, resulting in increased work per unit of area. If the working speed is 0 km/h, the tines are raised above the raking height that has been set in order to prevent forage contamination.

gapCONTROL – monitored rotor overlap function

The current overlap between the front and rear rotors is shown on the display. If the critical zone is reached, a warning is issued to the driver, who can then make sure that the rake's working width is utilised efficiently.

myMEMORY – be ready to work straight away

Compact transport Height of less than 4 metres

Thanks to the hydraulic chassis axle, it is easy to lower the JURAS 14055 PRO from the comfort of your seat in the tractor cab. (Transportation speeds of up to 40 km/h – country-specific).

Reduced ground pressure

The optimised spring relief on the lifting arms and the large tyres (550/45-22.5) minimise the impact on the ground, even at high speeds.