INCREASED EFFICIENCY THANKS TO THE FELLA PROCONNECT ISOBUS SYSTEM

A joystick is used to operate the system, providing maximum comfort for those long working days. All the functions, e.g. the single lift of all four rotors and working/swath width adjustment, are controlled by means of the FELLA proCONNECT system. The memory function for saving up to three different raking heights and the integrated hectare counter make the JURAS 14055 PRO the perfect machine for contractors.

FLEXHIGH – THE FASTER WAY TO PRODUCE HIGH-QUALITY FORAGE

The flexHIGH speed-dependent raking height adjustment function makes adjustments in response to the increasing distance between the tines and the ground that occurs as a result of the increased resistance from the forage when travelling quickly. This counteracts loss of forage at high working speeds, resulting in increased work per unit of area. If the working speed is 0 km/h, the tines are raised above the raking height that has been set in order to prevent forage contamination.

GAPCONTROL – MONITORED ROTOR OVERLAP FUNCTION

The current overlap between the front and rear rotors is shown on the display. If the critical zone is reached, a warning is issued to the driver, who can then make sure that the rake's working width is utilised efficiently.

MYMEMORY – BE READY TO WORK STRAIGHT AWAY

The rake management system automatically retrieves the values, raking height, working width and swath width that were set most recently. This reduces the chance of making operating errors and shortens set-up/take-down times when moving from one field to another.

COMPACT TRANSPORT HEIGHT OF LESS THAN 4 METRES

Thanks to the hydraulic chassis axle, it is easy to lower the JURAS 14055 PRO from the comfort of your seat in the tractor cab. (Transportation speeds of up to 40 km/h – country-specific).

REDUCED GROUND PRESSURE

The optimised spring relief on the lifting arms and the large tyres (550/45-22.5) minimise the impact on the ground, even at high speeds.