Tiller for Tractors Manual Lift 30'' Model - # 700312-5
GET YOUR TILLING DONE IN RECORD TIME
Get more out of your tractor, get it to till for you as well. Tills through any type of soil with ease, just drop it down and drive off. Gets the soil ready for seeding in no time so you may harvest your rewards sooner.
Requires
Fits on most brands of tractors from 14 to 28 HP with vertical engines (mower deck pulley located under the engine) with 20" minimum rear tires. Exception: Will fit Cub Cadet GT & GTX 2000 & 2500 Series with horizontal engines.
Tractor must be equipped with a rear transaxle bolt pattern of 16 1/4 inches or 14 inches center to center.
Durability
The precision ball bearings are covered for protection from dirt & debris.
Heavy gauge steel along with other quality components assure its dependability.
Endurance
The double layer housing made of 14 gauge steel protects the outer layer from dents caused by foreign objects.
Performance
The tines turn in the same direction as the tractor wheels avoiding any resistance by the tractor. its power will certainly amaze you for years to come.
Installation
Easy to install, pre-assembled at the factory:
Two brackets under the transaxle and one shoulder bolt on the tractor's frame.
Benefits
Controls at your Fingertips
Engage the tiller using the same system as the mower deck on your tractor.
Manual Lift
The handle located to the right of the driver will:
Lift and lower the tiller;
Adjust the depth from 0 to 6'' deep.
Fits Various Tractors
Universal mount allows it to fit most brands of lawn & garden tractors with motors between 14 to 28 HP.
No Tire Tracks
Offset to the right to eliminate the tire tracks.
Easy Installation
Pre-assembled at the factory to facilitate installation.
Specifications
Dimensions
30" wide
Offset to the right to eliminate the tire tracks.
Weight
310 lb
Warranty
Residential Use : 1 year
Semi-commercial, Professional or Rental Use: 90 days
Lift
Using a handle located to the right of the driver.
Also used to adjust the depth desired from 0 to 6'' deep.
Powder Coating
Black powder coat is baked on for a long rust free life.
1 Frame
Double layer housing made of 14 gauge stee.
2 Protective Panel
Protective panel may be raised for access to tines.
3 Tines
16 tines measure 14" in diameter.
4 Chain
Chain: # RC 50.
5 Bolt Pattern
Tractor must be equipped with a rear transaxle bolt pattern of 16 1/4 inches or 14 inches center to center. (See drawing)